Third-stage "A" pre-filtration cartridge suitable for 3-Stage filtration bank for Steris® Automated Endoscope Reprocessor systems in Australia.
The Premier Pleat Polypropylene 10" filter cartridge offers excellent dirt holding capacity due to it's pleated media construction. Constructed with a rigid core and protective outer cage, the media is protected from damage and the pleat pack stays strong and effective.
This second-stage pre-filter removes fine particulate in the water supply and protects the second-stage 0.2 Micron absolute rated sterile filter from excessive loading.
Cartridge Length: 9 ¾" (248mm)
Cartridge Diameter: 2.5" (63.5mm)
Micron Rating: 0.2µm (Nominal 98%)
Media Type: Pleated Polypropylene
Internal Core: Rigid Polypropylene
External Cage: Rigid Polypropylene
End Caps: Silicone
Cross Reference Codes
Order Code
|
Pall® Filtration
|
Device Technologies®
|
Steris®
|
FPPP-0.2-934AAS
|
PFT0210UN44
|
ST-FPC0A
|
A1501
|
Disclaimer: Please note, the above filtration element is recommended as a suitable cartridge for Endoscopy applications. In many cases, specific cartridge types and medias have been selected by filtration consultants to achieve specific desired performance. Always check with your equipment service agents or contact our office on 1800 446 500 if in doubt.