The X100B Polypropylene Bag Filter Housing is ideal for rainwater and light-commercial applications for reduction of sediments in the water supply.
Light-weight and chemical resistant, this versatile housing is manufactured from UV-resistant polypropylene and offer an economical housing to suit a range of applications.
Each system includes plastic housing support legs for simple mounting of the system to the floor.
With inlet and outlet ports of 2" BSP-F (50mm), flow rates of up to 220 litres/minute can be achived depending on the bag rating. Water enters the housing from the side (top) and exits through the bottom of the housing.
X100 Bag elements are available in polypropylene from 1 micron up to 300 micron performance and the nylon bag series offers ratings up to 800 microns.
Is this housing equivalent to the Pall / FSI X100 Bag Filter Housings?
The Aquastream X100 version is almost identical, and are commonly installed in place of the Pall/FSI housings.
Please see below comparison table:
| |
Pall / FSI X100 Housing |
Aquastream X100 Housing |
| Housing Material |
Polypropylene |
Polypropylene |
| Bag Type |
X100 (Also known as Size 5) |
X100 (Also known as Size 5) |
| Max. Working Pressure |
600 kPa (700kPa pre 2017) |
600 kPa |
| Max. Clean Water Flow |
300L/min |
300L/min |
| Port Location |
Side Entry/Bottom Outlet |
Same Location as Pall/FSI |
| Port Size: Inlet/Outlet |
2" (50mm) BSP-F |
2" (50mm) BSP-F |
| Max Temperature |
43°C |
42°C |
Looking for filter bags to suit the X100B Bag Housing?
Polypropylene Bags - 1µm to 200µm
