Luminor UV Peripherals
UV Sensors, Solenoid and BMS modules for Galaxy and Luminor UV Systems
Lumior UV Systems can be optioned with a wide range of monitoring and BMS connectivity modules which integrate seamlessly with the UV control system.
Connection of these devices to the smart controller offers a wide range of options including UV intensity monitoring, BMS connectivity, solenoid shut-off and 4-20mA outputs for data logging and remote monitoring capabilities.
UV Sensor Module - The 254nm UV sensor module allows for a UV sensor upgrade to all Blackcomb 5.0 Systems or replacement on Backcomb 6.0 systems.
Solenoid Connection Module - Prevent untreated water from flowing through the UV system when the UV lamp fails or the UV intensity level drops below 50%
4-20mA Connection Module - This device allows for a 4-20mA signal transfer of the UV output to a remote device such as data-logger or computer.
Remote Alarm Module - This module provides "dry volt-free contacts" for remote installation of alarms, lights, PLC input, data logger and other equipment.
Luminor Blackcomb RS-B2.5 UV Sensor Module
The Luminor RS-B2.5 UV Sensor Module is a Teflon based, low-foulding UV sensor for integration with Blackcomb 5.0 and 6.0 Series UV systems. Continuous UV monitoring is displayed via the colour user intereface. Easy to install and replace.
$544.50
Luminor Blackcomb RS-B3.5 UV Sensor Module
The Luminor RS-B3.5 UV Sensor Module is a Teflon based, low-foulding UV sensor for integration with Blackcomb-HO 5.0 and 6.0 Series UV systems. Continuous UV monitoring is displayed via the colour user intereface. Easy to install and replace.
$544.50
Luminor Solenoid Connection Module
The Solenoid Connection Module connects to all Luminor Blackcomb 5.0/6.0 systems, providing the ability to prevent untreated water from leaving the UV system on lamp failure or low intensity UV output.
$465.30
-
Filter By Stock
Filter By Brand
If you would like to speak personally with our team, please call 1800 446 500 for prompt and professional advice.
