The Uniflow LP-350 Series reverse osmosis systems are engineered for light commercial applications for pure water, delivering between 600 - 1300 litres of pure water per day.
The pump-less system relies on mains pressure which ensures lower operating costs, less maintenance and simple installation and servicing.
Designed to purify municipal water supplies, the system comes complete with pre and post-membrane filtration and can be optioned as a deionised water system with the addition of final cartridge filtration.
Pressure gauges and dual TDS meter are provided for ease of operation and water quality monitoring.
Systems are supplied standard in wall-mount configuration and can be optioned with a floor-mount stand.
Pressure Tank Options:
Each system requires a pure water pressure storage tank to store water avaliable for use. Steel pressure tanks are available in 32 Litre and 75 Litre capacities.
Pure Water Flow Rates: As the LP-Series system relies on mains pressure to operate, it is important to note that both temperature and pressure fluctuations will affect the product water flow.
Optimum pure water production is achieved at an inlet pressure of 480 kPa (70PSI).
The inlet pressure should not fall below 350kPa or exceed 580kPa.
Optimum water temperature for best pure water production is achieved at 25°C.
|High capacity pump-less design
|Low maintenance required
|Corrosion resistant construction
|Pre-assembled and tested
|Quality product made in USA or Australia depending on availability